xin1946

<strike id="9txhf"></strike>
<sub id="9txhf"></sub>

<address id="9txhf"></address>

<address id="9txhf"></address>
<noframes id="9txhf">


      <em id="9txhf"><form id="9txhf"></form></em>

      <noframes id="9txhf"><address id="9txhf"><nobr id="9txhf"></nobr></address>

      <address id="9txhf"></address>

      <noframes id="9txhf">
      <noframes id="9txhf"><form id="9txhf"></form>
      <noframes id="9txhf"><form id="9txhf"></form>



        Test ID Test name
        C-120 Environmental Stress Cracking (ESCR)
        D-010 Solid Density
        D-015 Melt Density
        D-016 Bulk Density
        D-017 Drying for Moisture Sensitive Materials
        D-018 Moisture Analysis
        D-019 Water Absorption
        D-020 PVT (Isothermal Heating)
        D-021 PVT (Isobaric)
        D-022 Volumetric Expansion Coefficient by PVT
        D-023 High Rate PVT by Hybrid PVT/DSC
        D-024 Solid State Compressibility (PVT)
        D-026 High Pressure PVT
        D-040 Volumetric Expansion Coefficient by DMA
        G-000 Moldflow/C-MOLD Filling
        G-001 Moldflow/C-MOLD Filling + Juncture Losses
        G-002 Moldflow/C-MOLD Post-Filling
        G-003 Moldflow/C-MOLD Post-Filling + Juncture Losses
        G-006 Moldflow/C-MOLD Uncorrected Isotropic Shrinkage
        G-007 Moldflow/C-MOLD Uncorrected Anisotropic Shrinkage
        G-009 Moldflow/C-MOLD Mechanicals for Uncorrected Anisotropic Shrinkage
        G-010 C-MOLD Filling/Cooling
        G-011 C-MOLD Filling/Cooling + Juncture Loss (Bagley correction)
        G-012 C-MOLD Post Filling for Amorphous Plastics
        G-013 C-MOLD Post Filling + Juncture Loss for Amorphous Plastics
        G-014 C-MOLD Anisotropic Shrinkage & Warpage (Amorphous Plastics)
        G-015 C-MOLD Isotropic Shrinkage & Warpage (Amorphous Plastics)
        G-017 C-MOLD Post Filling for Semi-Crystalline Plastics
        G-018 C-MOLD Anisotropic Shrinkage for Semi-Crystalline Plastics
        G-114 Moldflow CRIMS Shrinkage
        G-115 Moldflow CRIMS Shrinkage + Juncture Losses
        G-116 Moldflow MF/Stress Anisotropic
        G-117 Moldflow MF/Stress Isotropic
        G-120 Autodesk Helius PFA
        G-150 Moldex3D Flow/Cool
        G-152 Moldex3D Flow/Pack/Cool
        G-154 Moldex3D Flow/Pack/Cool/Warp (Isotropic)
        G-155 Moldex3D Flow/Pack/Cool/Warp (Anisotropic)
        G-158 Moldex3D Isotropic Mechanical Properties
        G-159 Moldex3D Anisotropic Mechanical Properties
        G-170 DIGIMAT MX Elastic eX-E
        G-171 DIGIMAT MX Elasto-Plastic (J2_EP)
        G-171RE DIGIMAT J2_EP Reverse Engineering
        G-172 DIGIMAT MX Druker Prager (DP)
        G-172RE DIGIMAT DP Reverse Engineering
        G-173 DIGIMAT MX Elasto-plastic with Damage (EP+D)
        G-173RE DIGIMAT EP+D Reverse Engineering
        G-174 DIGIMAT MX Crash (EVP)
        G-174RE DIGIMAT EVP Reverse Engineering
        G-175 DIGIMAT MX Creep (TEVP)
        G-175RE DIGIMAT TEVP Reverse Engineering
        G-176 DIGIMAT MX Warpage (Thermomechanic)
        G-176RE DIGIMAT TE Reverse Engineering
        G-178 DIGIMAT MX Crash (EVP) Multi-Direction Rate Dependent Model
        G-190 Altair Multiscale Designer for Unidirectional (UD) Composites
        G-210 I-DEAS Mold Fill/Cool
        G-212 I-DEAS Packing
        G-215 I-DEAS Isotropic Viscoelastic Shrink/Warp
        G-216 I-DEAS Isotropic Shrink/Warp
        G-220 VISI Flow Filling
        G-222 VISI Flow Filling/Thermal
        G-224 VISI Flow Shape
        G-242 SIMPOE Thermoplastic Filling Analysis
        G-244 SIMPOE Thermoplastic Filling Analysis with Warpage
        G-250 Cadmould Filling
        G-251 Cadmould Packing
        G-260 SIGMASOFT Thermoplastic: Unfilled Amorphous Material
        G-262 SIGMASOFT Thermoplastic: Filled Amorphous Material
        G-264 SIGMASOFT Thermoplastic: Unfilled Semi-Crystalline Material
        G-266 SIGMASOFT Thermoplastic: Filled Semi-Crystalline Material
        G-268 SIGMASOFT Elastomer: Standard Filling + Curing
        G-269 SIGMASOFT MIM
        G-270 PlanetsX Flow / Pack / Cool (Thermoplastic Resin)
        G-271 PlanetsX Flow / Pack / Cool / Warp (Thermoplastic Resin)
        G-274 PlanetsX Flow / Pack/ Cool (Thermosetting Resin)
        G-275 PlanetsX Flow / Pack/ Cool/ Warp (Thermosetting Resin)
        G-310 POLYFLOW Extrusion (Viscous Isothermal)
        G-312 POLYFLOW Extrusion (Viscous Non-Isothermal)
        G-314 POLYFLOW Extrusion (Iso-Thermal Viscoelastic)
        G-315 POLYFLOW Extrusion (Viscoelastic)
        G-320 POLYFLOW Thermoforming (Isothermal)
        G-321 POLYFLOW Thermoforming (Non-Isothermal)
        G-330 POLYFLOW Blow Molding (Isothermal)
        G-331 POLYFLOW Blow Molding (Non-Isothermal)
        G-350 Polycad
        G-360 VEL Basic
        G-361 VEL Basic + Melt Thermal Properties
        G-362 VEL Basic + Melt & Solid Thermal Properties
        G-363 VEL Basic + Normal Stress & Elongational Viscosity
        G-370 HyperXtrude
        G-380 WinTXS Melt Only TestPak
        G-382 WinTXS General TestPak
        G-390 PELDOM Isothermal TestPak
        G-392 PELDOM Non-Isothermal TestPak
        G-393 PolyXtrue Extrusion TestPak
        G-394 PolyXtrue Extrusion Economy TestPak
        G-410 FIDAP CFD Isothermal
        G-430 Universal TestPak-Elastic Plastic Model
        G-432 Universal TestPak-Hyperelastic (Incompressible)
        G-434 Universal TestPak-Hyperelastic (Compressible)
        G-460 Universal TestPak-Rate Dependent Model
        G-510 PAM-CRASH Strain Rate Dependent Foam
        G-520 PAM-CRASH Strain Rate Dependent Isotropic Material
        G-540 PAM-FORM Isothermal Forming
        G-542 PAM-FORM Non-Isothermal
        G-550 PAM-Comfort Cover (Static)
        G-551 PAM-Comfort Padding (Static)
        G-552 PAM-Comfort Foam (Static)
        G-553 PAM-Comfort Foam (Dynamic)
        G-600 RADIOSS Elastic Material Model (Law 1)
        G-601 RADIOSS Johnson-Cook Quasi-Static Material Model (Law 2)
        G-602 RADIOSS Tensile Rate Dependent Model (Laws: 2, 36, 44)
        G-603 RADIOSS Quasi-Static Foam Material (Law 70)
        G-604 RADIOSS Rate Dependent Foam Model (Law 70)
        G-605 RADIOSS Rate Dependent Foam Model with Unloading (Law 70)
        G-606 RADIOSS Hyperelastic Model (Law 42, 69)
        G-607 RADIOSS Hyperelastic Model with Viscoelasticity (Law 42)
        G-610 EXTRUD Extrusion (Non-Isothermal)
        G-653 SolidWorks Nonlinear Elastic
        G-654 SolidWorks Plasticity – von Mises
        G-660 SolidWorks HyperElastic – Ogden and Mooney Rivlin
        G-662 SolidWorks Viscoelastic (Creep)
        G-680 Autodesk Inventor Isotropic Elastic Model
        G-705 Abaqus Isotropic Elastic Model (*ELASTIC)
        G-706 Abaqus Orthotropic Composite
        G-708 Abaqus Metal Forming (*ELASTIC *CREEP, OPTION=POTENTIAL)
        G-709 Abaqus Finite Elastic Plasticity (*HYPERELASTIC *PLASTIC)
        G-711 Abaqus Elastic and Plastic model (*ELASTIC *PLASTIC)
        G-712 Abaqus Rate Dependent Viscoplastic (*RATE DEPENDENT)
        G-720 Abaqus Hyperelastic Incompressible (*HYPERELASTIC)
        G-722 Abaqus Hyperelastic Compressible (*HYPERELASTIC)
        G-723 Abaqus Hyperfoam (*HYPERFOAM)
        G-724 Abaqus Crushable Foam (*ELASTIC *CRUSHABLE FOAM)
        G-725 Abaqus Crushable Foam with Rate Dependency (*ELASTIC, *CRUSHABLE FOAM, OPTION=RATE DEPENDENT)
        G-730 Abaqus Creep Model (*CREEP, LAW=TIME)
        G-740 Abaqus Stress Relaxation (*VISCOELASTIC, TIME=RELAXATION)
        G-742 Abaqus Viscoelastic Model (*VISCOELASTIC)
        G-743 Abaqus Non-Linear NVH Model - Rubber and Foam
        G-744 Abaqus Creep (*VISCOELASTIC, TIME=CREEP)
        G-751 ANSYS Kinematic Hardening (BKIN, MKIN/KINH)
        G-753 ANSYS Isotropic Hardening (BISO, MISO)
        G-754 ANSYS non-linear kinematic hardening Chaboche model (CHABOCHE)
        G-755 ANSYS Viscoelastic (TB, Prony or EVISC)
        G-757 ANSYS Creep (CREEP)
        G-759 ANSYS Ogden Foam
        G-760 ANSYS Hyperelastic w/ compressibility (HYPER)
        G-761 ANSYS Hyperelastic (HYPER)
        G-762 ANSYS Multilinear Elastic (MELAS)
        G-763 ANSYS Gasket (GASKET)
        G-770 LS-DYNA High Speed 3 Point Flexural Rate Dependent Model (MAT_019 or MAT_024)
        G-771 LS-DYNA High Speed Tensile Rate Dependent Model (MAT_019 or MAT_024)
        G-771V LS-DYNA Validated High Speed Tensile Rate Dependent Model (MAT_019 or MAT_024)
        G-772 LS-DYNA High Speed Foam Model (MAT_083 or MAT_163)
        G-776 LS-DYNA GISSMO Failure Model
        G-778 LS-DYNA SAMP-1 Semi-Analytical Model for Plastic (MAT_187)
        G-780 LS-DYNA Hyperelastic (MAT_027)
        G-782 LS-DYNA Hyperviscoelastic Rubber (MAT_077)
        G-784 LS-DYNA Simplified Rubber with Rate Dependency (MAT_181)
        G-790 LS-DYNA Forming (Barlat 3-parameter model: MAT_036)
        G-791 LS-DYNA Transversely Anisotropic Elastic Plastic (MAT_037)
        G-792 LS-DYNA Isotropic Elastic (MAT_001)
        G-793 LS-DYNA Plastic Kinematic (MAT_003)
        G-794 LS-DYNA Laminated Composite Fabric (MAT_054)
        G-801 MSC.NASTRAN Linear Elastic (MAT1)
        G-805 MSC.NASTRAN Orthotropic Elastic (MAT8)
        G-807 MSC.NASTRAN Plasticity Model (MATS1)
        G-808 MSC.NASTRAN Temp. Dependent Linear Elastic (MATT1)
        G-810 MSC.NASTRAN Hyperelastic Incompressible Model (MATHP)
        G-811 MSC.NASTRAN Hyperelastic Compressible Model (MATHP)
        G-814 MSC.NASTRAN Creep Model (CREEP)
        G-860 MSC.Dytran Isotropic Elastic (DMATEL)
        G-869 MSC.Dytran Piecewise Linear Plasticity (Quasi-Static Properties) (DYMAT24)
        G-870 MSC.Dytran Rate Dependent Flexural Piecewise Linear Plasticity (DYMAT24)
        G-871 MSC.Dytran Rate Dependent Tensile Piecewise Linear Plasticity
        G-901 MSC.MARC Linear Isotropic
        G-905 MSC.MARC Orthotropic Linear Elastic
        G-907 MSC.MARC Strain Rate Dependent Non-Linear
        G-908 MSC.MARC Work Hardening Model
        G-909 MSC.MARC Mechanical Temperature
        G-910 MSC.MARC Creep/Stress Relaxation Model
        G-912 MSC.MARC Isotropic Viscoelastic
        G-914 MSC.MARC Hyperelastic Model
        G-925 NX Nastran Linear Elastic (MAT1)
        G-929 NX Nastran Isotropic Heat Transfer (MAT4)
        G-932 NX Nastran Orthotropic (MAT8)
        G-936 NX Nastran Gasket Material (MATG)
        G-937 NX Nastran Hyperelastic (MATHE)
        G-938 NX Nastran Hyperelastic Incompressible (MATHP)
        G-939 NX Nastran Hyperelastic (Compressible) (MATHP)
        G-940 NX Nastran Material Stress Dependence (MATS1)
        G-941 NX Nastran Isotropic Temperature Dependence (MATT1)
        G-942 NX Nastran Isotropic Creep (CREEP)
        G-950 T-SIM Basic
        G-951 T-SIM Basic + Thermal Properties
        G-980 B-SIM Basic
        G-981 B-SIM Basic + Thermal Properties
        M-010 Anisotropic Tensile Moduli
        M-011 Tensile Modulus
        M-012 Compressive Modulus
        M-013 Orthotropic In-Plane Shear Modulus (Includes M-010, M-101)
        M-014 Bulk Modulus (Up To 8 Temperatures)
        M-015 Flexural Modulus and Strength
        M-016 Tensile Modulus, Strength and Elongation
        M-017 In-Plane Shear Modulus (Plate Twist Method)
        M-030 Tensile Strength
        M-031 Compressive Strength
        M-032 Tear Strength of Rubber
        M-033 Blocking Strength
        M-034 Short Beam Shear Strength
        M-035 Plastic Point in Tension
        M-036 Plastic Point in Flexure
        M-037 Plastic Point In Compression
        M-038 Shear Strength
        M-040 Bearing Strength
        M-041 Lap Shear Strength
        M-043 Peel Test
        M-050 Open Hole Tension (OHT)
        M-051 Open Hole Compression (OHC)
        M-052 Fracture Toughness and Strain Energy Release Rate
        M-052M Fracture Toughness of Metals (K1c)
        M-053M Crack Propagation of Metallic Materials
        M-060 Coefficient of Friction (Static and Dynamic)
        M-067 Abrasion Test, Filament & Wire
        M-068 Taber Abrasion Test
        M-101 Poisson’s Ratio and Tensile Modulus
        M-102 Poisson’s Ratio and Tensile Modulus (2-3 Direction)
        M-130 Tensile Strength with Plots
        M-204 Tensile Stress-Strain, Strength, and Modulus
        M-204HT High Temperature Tensile Stress Strain for Metals
        M-204V True Stress Strain Measurements Using 3D DIC
        M-205 Tensile Properties of Elastomers
        M-206 Tensile Stress-Strain, Strength, Modulus and Poisson's Ratio
        M-209 Combined Loading Compression (CLC)
        M-210 Compressive Stress-Strain, Strength and Modulus
        M-211 Lubricated Compressive Stress-Strain (Biaxial Tension)
        M-212 Compressive Properties of Elastomers
        M-213 Confined Compression Stress-Strain (Hydrostatic, for rubbers)
        M-214 Volumetric Stress Strain Curves
        M-215 Compressive Properties of Foam with Unloading
        M-218 Equibiaxial Tension of Elastomers
        M-219 Shear Stress-Strain
        M-220 Planar Tension (Shear)
        M-221 3 Point Flexural Stress-Strain, Strength and Modulus
        M-225 4 Point Flexural Stress-Strain, Strength and Modulus
        M-230 High Speed 3 Point Flexural Stress-Strain
        M-231 High Speed Compressibility of Foams and Elastomers
        M-232 High Speed Tensile Stress-Strain
        M-233 High Speed Compressive Stress-Strain
        M-235 Very High Speed Tensile Stress-Strain
        M-242 Biaxial Force and Surface Strain by Punch Test
        M-245 Forming Limit Diagram (FLD)
        M-250 Tensile Creep
        M-250H Tensile Creep With Humidity
        M-250HT High Temperature Tensile Creep of Metallic Materials
        M-251 Compressive Creep
        M-252 Flexural Creep
        M-254 Creep Rupture
        M-260 Compression Set of Rubbers (Constant Deflection)
        M-266 Long Term Instrumented Stress Relaxation
        M-410 Dynatup Instrumented Impact
        M-412 Falling Dart Uninstrumented Impact
        M-425 Izod Pendulum Impact
        M-427 Charpy Pendulum Impact
        M-502 Flexural Fatigue
        M-504 Flexural Fatigue S-N Curves
        M-508 Tensile Fatigue S-N Curve
        M-508M Tensile Fatigue S-N Curve of Metals (up to 60 Hz)
        M-509 3 pt. Flexural Fatigue S-N Curve
        M-512 Tensile Fatigue
        M-512M Tensile Fatigue of Metals (up to 60 Hz)
        M-513M Strain Controlled Fatigue of Metallic Materials (Up to 2 Hz)
        M-515M Strain Controlled Tensile Fatigue E-N curves for Metals (Up to 2 Hz)
        M-600 DMA - Tensile/Compressive ( 0.1-100 Hz)
        M-600t DMA- Tensile/Compressive Mastercurve
        M-601 DMA - Torsional (5 Temperatures, 0.1-500/s)
        M-602 DMA - Flexural (0.1-100 Hz)
        M-603 Shear Modulus vs. Temperature by DMA
        M-604 Flexural Modulus vs. Temperature by DMA
        M-605 Tensile Modulus vs. Temperature by DMA
        M-606 Compressive Modulus vs. Temperature by DMA
        M-610 Stress Relaxation/ Creep Compliance by DMA
        M-611 Stress Relaxation/Creep Compliance by Time Sweeps
        M-615 Creep-Relaxation by DMA-tensile, compressive or flex
        M-620 Dynamic Hysteresis Loop
        M-621 Cyclic Mullins Effect
        M-622 Cyclic Hardening Stress-Strain
        M-623 Cyclic Damage of Plastics
        M-624 Stepwise Tensile Stress Relaxation
        M-625 Stepwise Compressive Stress Relaxation
        P-110 Heat Aging
        P-210 Test Specimen Photo Documentation
        Q-123 Extrusion Blow Molding Processability
        Q-305 WSS-M99D68-A1
        R-011 Capillary Rheology (1 Temperature)
        R-012 Capillary Rheology with Bagley Correction (1 Temperature)
        R-013 Very High Shear Capillary Rheology (1 Temperature)
        R-014 Cogswell Extensional Viscosity
        R-015 Thermal Flow Stability
        R-016 Mooney Slip
        R-017 Binding Extensional Viscosity
        R-018 No-Flow Temperature
        R-019 Rheotens Melt Elasticity
        R-020 DMA Cone and Plate Dynamic Rheology (1 Temperature)
        R-021 DMA Cone and Plate Steady Shear Rheology (1 Temperature)
        R-022 DMA Parallel Plate Dynamic Rheology (3 Temperatures)
        R-023 First Normal Stress Difference by DMA (1 Temperature)
        R-024 Characteristic Relaxation Time by DMA (5 Temperatures)
        R-025 Thermal Stability by Cone and Plate DMA
        R-026 Transition Temperature by DMA
        R-027 Cure Kinetics by DMA-isothermal
        R-028 Cure Kinetics by DMA -non isothermal
        R-030 Die Swell Measurements by Laser Micrometry
        R-032 Static Die Swell/Sag by Laser Micrometry
        R-035 Slit-Die Rheology (1 Temperature, 1 Die)
        R-040 Equibiaxial Elongational Viscosity (1 Temperature, 1 Strain Rates)
        R-042 Peldom Elongational Viscosity
        SC-101 FTIR Analysis
        SC-102 FTIR with EDS
        SC-103 Pyrolysis Mass-Spec Analysis
        SC-104 FTIR (micro) with EDS
        SC-105 Ash Content by Muffle Furnace
        SC-107 Flammability
        SC-201 Molecular Weight by GPC
        SC-210 Fogging Test
        SC-211 Thermal Oxidative Stability
        SH-100 Western Europe Small Sample PickUp- 2 kg Limit
        SH-200 Western Europe Large Sample PickUp- 25 kg Limit
        SM-065 Rockwell Hardness
        SM-067 Durometer Hardness
        SM-210 Optical Haze / Optical Transmission
        SM-210 Optical Haze / Optical Transmission
        SO-200 Matereality Personal Material DatabasePro
        SO-201 Matereality Workgroup Annual Subscription-5
        SO-202 Matereality Workgroup DatabasePro
        SO-202 Matereality Workgroup DatabasePro
        SO-220 Matereality Material Supplier Database
        SO-245 Matereality Scaled Material Data Server
        SO-280 Matereality ANSYS DatabaseLite Upgrade
        SP-101 Specimen Molding Services
        SP-105 Specimen Machining Services
        SR-010 Melt Flow Rate
        SR-011 Relative Viscosity
        SR-095 Brookfield Viscosity
        ST-308 Mold Shrinkage
        T-010 DSC Scan
        T-012 Transition and Eject Temperature
        T-015 Specific Heat
        T-020 Heat Deflection Temperature
        T-021 Vicat Softening Temperature
        T-101 Thermal Conductivity (Melt)
        T-102 Thermal Conductivity (Solid)
        T-103 Thermal Conductivity Scan
        T-107 Thermal Conductivity by Guarded Heat Flow Meter (Single Point)
        T-108 Thermal Conductivity by Guarded Heat Flow Meter (Scan)
        T-110 Thermal Conductivity of Films by Guarded Heat Flow Meter
        T-150 Heat Transfer Coefficient
        T-201 Carbon Black Content by TGA
        T-203 Thermogravimetric Analysis (TGA)
        T-302 Thermal Expansion Coefficient by TMA (Anisotropic)
        T-303 Thermal Expansion Coefficient by TMA
        T-310 Thermal Diffusivity by Holometrix (Scan)
        T-311 Thermal Diffusivity by Holometrix (Single Point)
        U-060 Universal TestPak-Injection Molding of Isotropic Materials
        U-061 Universal TestPak-Injection Molding of Anisotropic Materials
        U-063 Moldflow CRIMS Shrinkage Option
        U-064 SIGMASOFT Shrinkage Option
        U-065 Juncture Loss Option for Moldflow
        V-101 Falling Dart Impact Validation for LS-DYNA Crash Material Model
        V-102 Falling Dart Impact Validation for Abaqus Crash Models
        V-150 Ribbed Plaque Flexural Validation for Abaqus *Elastic *Plastic Model
        V-151 Ribbed Plaque Flexural Validation for Elastic Plastic Model
        V-160 Compressive Validation for ANSYS Hyperelastic Model
        V-170 Torsional Crank Validation of Additive Material Models in ANSYS
        V-171 Torsional Crank Validation of Additive Material Models in Abaqus
        V-172 Torsional Crank Validation of Additive Material Models in RADIOSS
        Z-996 Data Unit Conversion
        Z-998 Data Analysis
        Z-999 Custom Test
        livechat button
        <strike id="9txhf"></strike>
        <sub id="9txhf"></sub>

        <address id="9txhf"></address>

        <address id="9txhf"></address>
        <noframes id="9txhf">

        
        

            <em id="9txhf"><form id="9txhf"></form></em>

            <noframes id="9txhf"><address id="9txhf"><nobr id="9txhf"></nobr></address>

            <address id="9txhf"></address>

            <noframes id="9txhf">
            <noframes id="9txhf"><form id="9txhf"></form>
            <noframes id="9txhf"><form id="9txhf"></form>

              Mobile Games

              reading

              education

              game

              search for

              game

              Variety show

              explore

              news